Seed Cleaning Equipment seed grader Features

1, for the processing of seeds and grains and beans can replace gravity machine, or greatly improve clarity gravity machine into the Ctgrain Seed Cleaning Equipment machine, reducing the proportion of machine workload, increase production;
2, for the Ctgrain Grain Cleaners processing of wheat, rice, corn, soybeans, sorghum grain yield can reach 25 tons per hour, and can remove more than 90% of the blighted seed, bud grain, grain moth, moldy grain, grain smut lighter materials such as particles;
3, winnowing, the proportion of elected once completed, reduce labor, energy saving;
4, maintenance-free vertical air sieve structure, with a cyclone, work process clean and green, without a lot of dust leakage;
5 ways to choose the material hoist, auger, belt conveyors, flexible and convenient.

Seed Cleaning Equipment, Air Cleaning kind of wheel spin machine

For early rice and wheat seed cleaning, the main part of the Ctgrain Ctgrain Seed Cleaning Equipment top or on the side with a fan, with a discharge outlet of the cone below. When the fan is rotated by the drive motor, the suction air flow upward from the discharge port, the cylinder-driven impeller rotating cone, impurities mixed with the seeds fall from the feed hopper to the Ctgrain Cylinder Separator impeller, the centrifugal force is continuously uniformly thin Shuaixiang layer near the inner wall of the annular cone airways, light impurities float upwards through the fan discharge, heavy grain will fall to the discharge port. Cone base diameter of 0.4 meters, driving the fan motor power of 0.64 kilowatts per hour cleaning seeds 3 to 4 tons, more than 99% cleanliness.

Seed Cleaning Equipment, Electromagnetic selection machine

In the electromagnetic field by the surface roughness of different Ctgrain Seed Cleaning Equipment seed selection seed. Its main component is the seed magnetic stirrer and magnetic roller. Seeds, magnetic powder and the amount of water was stirred in a mixer together with the rotating electromagnetic feed drum-roller shoe has a semi-circular magnet stationary. Powder does not adhere to a smooth surface and therefore the seeds of the side of the drum immediately rolled, the rough surface is sticky grain powder, under the action of the magnet in the drum surface are adsorbed, with the rotation of the drum before falling to the non-magnetic region, the seed surface the rougher, the more attached magnetic, and therefore the greater the adhesive force, is driven farther distance. Common Ctgrain Cylinder Separator electromagnetic drum diameter of 400 to 500 mm, length 500 to 750 mm, the rotational speed of from 30 to 45 rev / min, the productivity of up to 200 ~ 500 kg / hr.

Seed Cleaning Equipment features

1, reasonable design, reliable, almost no failures.
2, Ctgrain Seed Cleaning Equipment to achieve winnowing, screening, eye nest election, the proportion of elected four ways integration. Good selection effect. When outstanding performance for the selected wheat species, except oats, barley, broken short grain capability; sold when the election species, except oats, wheat grain, grain mans ability; when selecting rice, except rice, mango tablets ability.
3, Ctgrain Grain Cleaning Machine versatility is strong. For a variety of cereals, canola and other crops seeds class selection.
4, easy to operate, suitable for flexible, service radius. Both can be used as stand-alone roving mobile operations, you can also do seed processing plants were fixed line operations.
5, do not mistake farming, breeding and sell grain to achieve correct.

Seed Cleaning Equipment Gravity Stoner maintenance tips

Suction specific Ctgrain Seed Cleaning Equipment gravity stoner is mainly used for food processing, can clean wheat, rice, soybean, peanut , rapeseed, rice alongside stone and higher impurities , can also be used for the separation of impurities in some other grains . Gravity Stoner maintenance skills primarily by the following:
1 , stone plate, leveling damper, throttle into the anti- hair- Road To maintain airflow unobstructed. Clogged sieve used to clean brush to clean , do not beat , in order to avoid distortion sieve , stoner affect efficiency . If worn , should be replaced , double-sided convex scale hole sieve can be used upside down .
2 , regular inspection of the bearing temperature, generally room temperature does not exceed 25 ℃, the bearing should be cleaned regularly and oil changes.
3 , always check the amount of material containing the amount of grain containing stones and stone , such as abnormal , analyze the causes and promptly take appropriate measures , including the general amount of stone material should be controlled below 1%.
4, the first stop should stop feeding , after stopping the wind, and then shut down , and finally close the Ctgrain Wheat Flour Mixer damper . After stopping , the stone should be left to the sieve layer of material , in order to facilitate the next row of stone drove immediately to normal .
5 , machinery overhaul disassembly process, should pay attention to prevent loss and distortion of parts, components should be minimal demolition overhaul . When assembled, the machine must stand for the longitudinal centerline axis of symmetry , the original assembly according to the original position . Centerline sieve shall coincide with the center line of the frame , partial axis, the eccentric shaft connecting rod , placed under the rod axis , spindle vibration motor drive frame should be level and parallel to each other . Each axis horizontal and perpendicular to the longitudinal centerline of the sieve , stone sieve sieve along the width direction should be level.
6, after the overhaul should be smooth running empty assembly shall not distort or bumps. Correction to stone when the screen surface in the middle or on either side by side in the width direction while feeding into the same size as the heavy impurities , such as can simultaneously upward movement is normal ; then feeding experiment to observe the movement of materials and a row of stone cases ; then interrupt feeding, then near the end has partially blown rock phenomenon wear , under normal circumstances , blowing through the shape is symmetrical . Unilateral occurrence such as walking , a whirlpool and dead and so should be immediately corrected.

Seed Cleaning Equipment wheat stoner Note the use of the four events

Stoner function is through the action of wind, the use of wheat and sand density and suspension characteristics at different speeds reaching wheat produced graded gravel.
Ctgrain Seed Cleaning Equipment use should pay attention to what the problem?
1, we know that directly affect the stoner wind speed, wind pressure to stone effect, it must be equipped with a separate ventilation network, to ensure a stable and adequate air flow and air pressure.
2, Stoner had expected out of a soft breeze connected trail, but the damage caused by the instability of a machine wind, air pressure, the impact to the stone effect;
3, pay attention to the size of the screen surface inclination, then small stones easy to climb, while more heavy wheat also climbed row of stone mouth, sieve inclination is too large, then the difficulty climbing stones, stone row segment elongated, some stones will flow with the flow of wheat wheat exports;
4, long-term use of the screen surface, polished stones woven corrugated slip easily on the screen surface rolling off difficult, not climbing, discharge, stream flow easily over wheat exports, the impact to the stone effect. Then it must be replaced to stone screen surface.

Spiral classifier works

Spiral classifier by means of solid particles of different sizes, different specific gravity, thus settling velocity different principles in liquids, fine mineral particles floating in the water to overflow the coarse mineral particles sink to the bottom. Discharged by the screw into the upper part, to a hierarchical classification of mechanical equipment, the mill can grind material powder level in the filter, and then use the coarse material piece rotary vane screwed Ctgrain Seed Cleaning Equipment mill feed inlet, the filter out the fine material discharged from the overflow tube. The machine uses the base channel, the body uses welded steel. Into the head of the screw shaft, the shaft head, using cast iron sleeve, wear-resistant and durable, lifting devices of electric and manual.

Points to note the double helix mixer operation

1 . Should double helix mixer boot after feeding, starting with the material is prohibited , without stopping the machine the material.
2 In the material specific gravity ( bulk density ) ≤ 1 case , the material load should not exceed 60 % of the full amount of volume ( ie, the top of the spiral blade ) . If, in the material specific gravity ( bulk density ) > 1 , the load weight should be consistent with load factor 0.6 . ( Full volume * 0.6 = actual load weight ) .
3 with the liquid spray device , the material should be added after the liquid jet , various materials may be mixed simultaneously through the feed opening .
Before 4 double helix mixer feeding, should be carefully examined materials , ensure that the material must not be greater than Φ8 rigid debris, if found , should be removed before feeding debris .
5 Seed Cleaning Equipment material mixing time is usually between 6-15 minutes , may also be a longer time, the user can determine the mixing time according to their different needs uniformity .
6 If demanding material mixing uniformity must be achieved by sampling must choose devices with sampling ports . Thereby removing material through sampling ports not directly through the inlet when reclaiming equipment operation , the body may not extend into the barrel and hands more .

Grain cleaning machine friction separation

The extent of the impact of poor abrasion to separate impurities such as particles adhered to the surface of the food and trench dirt dirt, Mans , wool and wheat and other grain moth empty . Flowery iron sieve rotor threshing machine has hit a steel plate fitted , punching cylinder rotating in a sieve . Inside the grain into the fight between the plate and the cylindrical screen by the impact and friction while adhering to remove impurities , mud and insects have been broken and empty grains together along with the impurities from the plane through the sieve , wheat end grain discharged from the cylinder . Grain Cleaning Machine threshing machine structure is similar , but different operating parameters , to remove the weeds of rice and mango . The impact of the working parts suction fan is a high-speed rotating tip nail plate , nail plate of food when being thrown through the shoot , hit and fall to the rear bushing cone friction chamber , impact and friction by separating and removing impurities , food is after suction treatment discharge.
Additionally, you can clean up of two or more components of the composition of the different roles of a combination of grain cleaning equipment to shorten the process and reduce the number of equipment units , saving the plant area and lower power consumption, is particularly applicable to small and medium plants . Screening equipment commonly used in combination to stone combination machine, a combination of wheat screening machine, nest eye disc and drum combination machine grading stone combination machines.

Use tact cleaning sieve Features

Mobile dust Seed Cleaning Equipment grain cleaning equipment is ideal for removing impurities when food acquisition, warehousing, grain and oil processing industry is also grain processing equipment before cleaning, replacement of different mesh can be cleaned in different grains, can the local climate, environment under conditions of outdoor work under load, continuous, stable and reliable remove impurities in food for wineries, starch plants, feed mills, rice, sorghum, wheat and corn.